TEL-X-Driver

TEL-X-Driver

1,798.00

TEL-2590-3

  • Angular Resolution: up to 20 steps/degree
  • Time per step: ≥ 1 seconds
  • Approximate data range 2° - 120°
  • Export data to text file for analysis
  • Functions as a scaler for performing experiments of your choice
  • GM tube voltage selectable 0-1000V
  • X-ray tube current monitored

The TEL-X-Driver comes complete with everything you need to automate data taking with the TEL-X-Ometer. Take data from 12 to 120 degrees with a maximum resolution of 0.05 degrees. The time per step is also adjustable, and can be as little as .1 sec. Scans can be obtained for all 4 of the crystals available for use with the TEL-X-Ometer, NaCl, LiF, KCl, and RbCl. An additional feature includes the ability to scan powders and foils.

Quantity:
Add To Cart

TEL-2590-3

  • Angular Resolution: up to 20 steps/degree
  • Time per step: ≥ 1 seconds
  • Approximate data range 2° - 120°
  • Export data to text file for analysis
  • Functions as a scaler for performing experiments of your choice
  • GM tube voltage selectable 0-1000V
  • X-ray tube current monitored

The TEL-X-Driver comes complete with everything you need to automate data taking with the TEL-X-Ometer. Take data from 12 to 120 degrees with a maximum resolution of 0.05 degrees. The time per step is also adjustable, and can be as little as .1 sec. Scans can be obtained for all 4 of the crystals available for use with the TEL-X-Ometer, NaCl, LiF, KCl, and RbCl. An additional feature includes the ability to scan powders and foils.

The TEL-X-Driver is USB powered. A GM tube can be connected directly to this unit, negating the need for an additional scalar or ratemeter. Software allows selection of scan angles, resolution, and time/step. Data is automatically saved every 30 seconds thus preventing the loss of data during a long scan in the event of a power failure. Once the experiment is completed the software permits zoom-in on the data and the facility to add comments to the file. Data can be exported to a spreadsheet for further analysis.

Manual and software included.

Please note that the auxilary slide carriage cannot be used concurrently with the TEL-X-Driver. Most experiments can be adapted to work without the auxilary slide carriage. If you would like information on performing a specific experiment without the auxilary slide carriage, please contact us.