Radiation Counter

Radiation Counter

395.00

TEL-ST370

The TEL-ST370 Radiation Counter is a computer-operated complement to the popular ST360 Radiation Counter. Its major difference is that it does not offer standalone operation, since it is computer-controlled via a USB interface. This new instrument features many improvements and additions to enhance application and flexibility for Nuclear Science instruction, Nuclear Medicine and Health Physics training.

In addition to supporting many types of GM counters, the instrument now includes an internal preamplifier and improved high voltage supply to operate scintillation detectors for applications such as a gamma counter for wipe testing and other gross gamma measurements.

The ST370 is controlled by a PC or Macintosh computer for remote operation and data storage. Computer connectivity has been enhanced by the addition of a USB interface for Plug and Play operation. RS-232 serial outputs are still provided for connection to older computers without USB ports.

Quantity:
Add To Cart

TEL-ST370

The TEL-ST370 Radiation Counter is a computer-operated complement to the popular ST360 Radiation Counter. Its major difference is that it does not offer standalone operation, since it is computer-controlled via a USB interface. This new instrument features many improvements and additions to enhance application and flexibility for Nuclear Science instruction, Nuclear Medicine and Health Physics training.

In addition to supporting many types of GM counters, the instrument now includes an internal preamplifier and improved high voltage supply to operate scintillation detectors for applications such as a gamma counter for wipe testing and other gross gamma measurements.

The ST370 is controlled by a PC or Macintosh computer for remote operation and data storage. Computer connectivity has been enhanced by the addition of a USB interface for Plug and Play operation. RS-232 serial outputs are still provided for connection to older computers without USB ports.

Specifications:

Inputs: BNC connector for GM, MHV for scintillation detector.

High Voltage: 0 to +1200 volts, digitally selectable in 10 volt increments via hardware or 5 volt increments with included software.

Modes: Count for preset time preset number of runs, counts/min., counts/sec., set alarm level (in CPS), set high voltage 0-1200v, start/stop/reset, data transfer As well as a programable pause time between runs.

Timing/Counting Intervals: Preset time in (seconds) 1-9, 10-90, 100-900, 1K-9K, 10K-90K, 100K-900K, preset number of runs, CPM, CPS, set alarm (in CPS).

Data-Link: RS-232 serial port for PC and MAC plus a USB port.

Power: Input 9.0 volts DC, at 500mA from AC line/charger supplied. 

Software Supplied: STX software emulates the controls on a physical instrument. In addition, data can be stored and graphed.