Geiger Mueller Counter

Geiger Mueller Counter

830.00

TEL-ST360

New dimensions to Nuclear Science Instruction and Health Physics Training are available with the ST360 Geiger-Mueller Counter. A microprocessor controller incorporated in the ST360 means features previously available only by purchasing multiple instruments are now available in a single unit. The classical nuclear scaler has now become a timer, preset counter, digital ratemeter with alarm, and computer interface. A large 6 digit LED readout and a 0-1200VDC fully regulated variable power supply for GM or scintillation tubes is also a part of the ST360. All functions of the ST360 are accessible and can be controlled by the computer software provided with the unit.

Quantity:
Add To Cart

TEL-ST360

New dimensions to Nuclear Science Instruction and Health Physics Training are available with the ST360 Geiger-Mueller Counter. A microprocessor controller incorporated in the ST360 means features previously available only by purchasing multiple instruments are now available in a single unit. The classical nuclear scaler has now become a timer, preset counter, digital ratemeter with alarm, and computer interface. A large 6 digit LED readout and a 0-1200VDC fully regulated variable power supply for GM or scintillation tubes is also a part of the ST360. All functions of the ST360 are accessible and can be controlled by the computer software provided with the unit.

Specifications:

Inputs: BNC connector for GM, MHV for scintillation detector.

High Voltage: 0 to +1200 volts, digitally selectable in 10 volt increments via hardware or 5 volt increments with included software.

Display: 6-decade LED, 1 in. numerals. Displays counts, time, preset time, CPM, CPS, alarm level, and high voltage.

Audio: Digital volume control of countrate and alarm point.

Modes: Count for preset time preset number of runs, counts/min., counts/sec., set alarm level (in CPS), set high voltage 0-1200v, start/stop/reset, data transfer As well as a programable pause time between runs.

Timing/Counting Intervals: Preset time in (seconds) 1-9, 10-90, 100-900, 1K-9K, 10K-90K, 100K-900K, preset number of runs, CPM, CPS, set alarm (in CPS).

Data-Link: RS-232 serial port for PC and MAC plus a USB port.

Power: Input 9.0 volts DC, at 500mA from AC line/charger supplied. 

Software Supplied: A LABLINK software package for PC's and MAC is included with the TEL ST360. This bidirectional data link offers full control of all the MODE functions mentioned above. The software also provides a real-time display of a simulated analog ratemeter with auto-ranging, or a digital ratemeter in CPM or CPS, count, elapsed time, preset count, preset time, high voltage setting, acquisition time, and run number. Data is loaded into spreadsheet compatible files for transfer to many common spreadsheet programs.