Integrated Computer Spectrometer

Integrated Computer Spectrometer

2,200.00

TEL-ICS-1KPCI, ICS-2KPCI, ICS-4KPCI

  • Can be used for gamma and x-ray spectroscopy, single photon counting, half life and decay studies
  • High voltage and amplifier included on card
  • ISOMATCH software for easy nuclide identification included
  • All microcomputer controlled
  • 1024 channel, 2048 channel, 4096 channel versions
  • Direct access to ADC for use with solid state detectors such as alpha/beta spectrometers
  • Single PCI Slot

The TEL-ICSPCI INTEGRATED COMPUTER SPECTROMETER, is a PCI interface card 9.5 inches in length, which is an advanced, easy-to-use MultiChannel Analyzer constructed on a PCI plug-in card designed for installation on most PC's.  The card is available in 1024, 2048 and 4096 channel versions.  Advanced features include the control of the amplifier and the photo multiplier tube high voltage, both upper and lower level discriminators as well as the course and fine gain. On-Card data memory, software for Windows 98 or higher, the ability to use this card with other detector systems such as HpGe, alpha spectrometers or photon detectors with external amplifiers and the built in high voltage supply for photo multiplier tubes make this a versatile card. In addition, computer controlled input selectors are provided to bypass the scintillation amplifier and allow direct access to the ADC or MCS input.  An optional sub-panel is available at additional cost, to gain access to Gate input, MSB output for Mossbauer control and custom control signals.

Quantity:
Add To Cart

TEL-ICS-1KPCI, ICS-2KPCI, ICS-4KPCI

  • Can be used for gamma and x-ray spectroscopy, single photon counting, half life and decay studies
  • High voltage and amplifier included on card
  • ISOMATCH software for easy nuclide identification included
  • All microcomputer controlled
  • 1024 channel, 2048 channel, 4096 channel versions
  • Direct access to ADC for use with solid state detectors such as alpha/beta spectrometers
  • Single PCI Slot

The TEL-ICSPCI INTEGRATED COMPUTER SPECTROMETER, is a PCI interface card 9.5 inches in length, which is an advanced, easy-to-use MultiChannel Analyzer constructed on a PCI plug-in card designed for installation on most PC's.  The card is available in 1024, 2048 and 4096 channel versions.  Advanced features include the control of the amplifier and the photo multiplier tube high voltage, both upper and lower level discriminators as well as the course and fine gain. On-Card data memory, software for Windows 98 or higher, the ability to use this card with other detector systems such as HpGe, alpha spectrometers or photon detectors with external amplifiers and the built in high voltage supply for photo multiplier tubes make this a versatile card. In addition, computer controlled input selectors are provided to bypass the scintillation amplifier and allow direct access to the ADC or MCS input.  An optional sub-panel is available at additional cost, to gain access to Gate input, MSB output for Mossbauer control and custom control signals.

Stability and low noise operation is achieved by regenerating critical power on the card through the use of a high efficiency converter powered from the computer. An on-board microprocessor controls storage device and the communication link to the PC bus. The on-board amplifier and high voltage is fully compatible with standard scintillation detectors.

A high speed 6µsec. ADC offers excellent data throughput at high counting rates with minimal dead-time losses.  Conversion gain may be changed via the software.  Data from the ADC is stored directly in on-board memory for autonomy and high speed operation, freeing the host PC for other tasks. 

A single standard card slot is required for the ICS-PCI. It has been designed for installation in IBM compatible computers with a minimum of 512K Ram and EGA or VGA graphics.

To aid in the identification of nuclides, the ICS-PCI contains a unique peak labeling feature named ISOMATCH. Providing the unit is accurately energy calibrated, the user may select a nuclide from the library and the corresponding characteristic emission lines are superimposed on the spectrum along with isotope and energy information.  Using this feature, users may quickly check a spectrum and visually identify the emission components for each nuclide present.  

Available in 1K, 2K, and 4K.

TEL-ICS-1KPCI $2,200.00

TEL-ICS-2KPCI $2,420.00

TEL-ICS-4KPCI $2,750.00